颜东升,王一飞,朱宜生.断路器抗冲击性能考核试验时的安装方向选择[J].装备环境工程,2012,9(5):79-82. YAN Dong-sheng,WANG Yi-fei,ZHU Yi-sheng.Installation Direction Selecting for Inspection Test of Anti-Strike Performance of Circuit Breaker[J].Equipment Environmental Engineering,2012,9(5):79-82. |
断路器抗冲击性能考核试验时的安装方向选择 |
Installation Direction Selecting for Inspection Test of Anti-Strike Performance of Circuit Breaker |
投稿时间:2012-08-01 修订日期:2012-10-15 |
DOI: |
中文关键词: 舰艇设备 冲击试验 安装方式和方向 典型断路器 最严酷安装状态 |
英文关键词:shipborne equipment strike test installation method and direction typical circuit breaker worst installation condition |
基金项目: |
|
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
舰艇设备的抗冲击能力是其作战性能的重要指标之一, 对于其装舰前的冲击试验考核是环境试验的一项重要内容, 在无法明确设备在舰上安装方式和方向时, 考核应模拟最严酷的工作条件和船上可能使用的安装方法, 以船用典型断路器为例, 简要描述了冲击条件下最严酷安装状态的分析选择过程, 以期作为其它舰用设备冲击考核试验所选试验工况的参考。 |
英文摘要: |
Anti-strike ability of shipborne equipment is one of the important specifications of combat performance. The inspection test before installation is an important item of environment test as well. If installation method and direction of equipment onboard can not be identified before hand, the inspection test should be performed at worst condition and by probable installation method. Taking typical circuit breaker as example, this paper introduced the analysis and selection of worst installation condition in strike condition briefly. The purpose was to provide reference for selecting test condition of anti-strike inspection test for shipborne equipment. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |