陈珊,李国明,常万顺,陈学群.5083铝合金电化学性能影响因素研究[J].装备环境工程,2013,10(1):22-25. CHEN Shan,LI Guo-ming,CHANG Wan-shun,CHEN Xue-qun.Research of Influential Factors on Electrochemical Behavior of AA5083[J].Equipment Environmental Engineering,2013,10(1):22-25. |
5083铝合金电化学性能影响因素研究 |
Research of Influential Factors on Electrochemical Behavior of AA5083 |
投稿时间:2012-08-24 修订日期:2013-01-01 |
DOI: |
中文关键词: 5083铝合金 点蚀 动电位和循环极化 表面状态 pH值 |
英文关键词:AA5083 pitting corrosion potentiodynamic and cyclic polarization surface state pH value |
基金项目:海军工程大学基金项目(20100604000009) |
|
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
采用动电位扫描及循环伏安试验方法,研究了工作电极表面状态、Cl-浓度、pH值等因素对5083铝合金在质量分数为3.5%的NaCl溶液中电化学性能的影响。研究结果表明,试样表面进行抛光后,点蚀电位变正,点蚀保护电位正移。随着Cl-浓度的降低,点蚀电位Eb明显正移;当Cl-浓度超过1%(质量分数)后,Cl-浓度对Eb的影响则不明显。溶液的pH值及其它阴离子的添加均会对5083铝合金点蚀电位及保护电位产生影响。 |
英文摘要: |
The influential factors such as surface state of working electrode, the chloride concentration, and pH value on AA5083 electrochemical behavior in 3.5% NaCl solution were investigated using potentiodynamic polarization and cyclic polarization experiment. The results showed that the Epit and Ecor potentials shift to positive values when specimen surface is polished;Eb shift to positive significantly with decrease of chloride concentration; chloride concentration has little influence onEb when the concentration exceeds1.0%; pH and other ion concentration has influence on Epit andEp. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |