潘鹤斌,孔小东,苏小红.两种铸铁的耐蚀性比较[J].装备环境工程,2014,11(3):20-24,29. PAN He-bin,KONG Xiao-dong,SU Xiao-hong.Comparison of the Corrosion Resistance of Two Types of Cast Iron[J].Equipment Environmental Engineering,2014,11(3):20-24,29. |
两种铸铁的耐蚀性比较 |
Comparison of the Corrosion Resistance of Two Types of Cast Iron |
投稿时间:2014-03-24 修订日期:2014-04-22 |
DOI:10.7643/issn.1672-9242.2014.03.005 |
中文关键词: 铸铁 氯化钠溶液 耐蚀性 均匀腐蚀 |
英文关键词:cast iron NaCl solution corrosion resistance uniform corrosion |
基金项目: |
|
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目的 探究不同基体组织、石墨形态的铸铁在静止模拟海水全浸条件下的腐蚀性能及其机理。 方法 采用电化学线性极化曲线,交流阻抗和全浸挂片试验等方法。 结果 灰铸铁的腐蚀速率大于球墨铸铁。 结论 球墨铸铁和灰铸铁腐蚀类型均为全面均匀腐蚀,而且球墨铸铁耐蚀性能好于灰铸铁。 |
英文摘要: |
Objective To study the corrosion behaviors and mechanisms of cast iron with different graphite morphology and matrix under the condition of total immersion in 3% NaCl solution. Methods The polarization curve, EIS and the coupon corrosion tests were used. Results The results showed that the corrosion rate of gray cast iron was greater than that of ductile iron. Conclusion The gray cast iron and ductile iron both had general uniform corrosion, and the corrosion-resistance property of ductile iron was superior to that of gray cast iron. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|