周述璋,侯亭波,潘敏强,韩尧,陈妍.烧结多孔管的制作及其沸腾传热研究[J].装备环境工程,2014,11(3):91-95. ZHOU Shu-zhang,HOU Ting-bo,PAN Min-qiang,HAN Yao,CHEN Yan.Production of Sintered Porous Tube and the Study of Boiling Heat Transfer[J].Equipment Environmental Engineering,2014,11(3):91-95. |
烧结多孔管的制作及其沸腾传热研究 |
Production of Sintered Porous Tube and the Study of Boiling Heat Transfer |
投稿时间:2014-02-07 修订日期:2014-03-25 |
DOI:10.7643/issn.1672-9242.2014.03.019 |
中文关键词: 沸腾传热 烧结多孔层表面 铜粉粒径 |
英文关键词:boiling heat transfer sintered porous layer surface particle size of copper powder |
基金项目:霍英东教育基金会高等院校青年教师基金项目( 132021 ) ; 广东省工业攻关项目( 2012B010500021 ) ; 广州市珠江科技新星项目(2013J2200060) |
|
Author | Institution |
ZHOU Shu-zhang | School of Design, South China University of Technology, Guangzhou 510006, China |
HOU Ting-bo | School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China |
PAN Min-qiang | School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China |
HAN Yao | School of Design, South China University of Technology, Guangzhou 510006, China |
CHEN Yan | School of Design, South China University of Technology, Guangzhou 510006, China |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目的 研究烧结多孔管表面多孔层的制造工艺,并对铜粉烧结多孔层表面的传热性能进行测定。 方法 利用烧结模具在铜管外面烧结铜??并通过实验计算出多孔烧结管的热通量和强化换热系数。 结果 铜粉烧结后的铜管在酒精中的强化传热效果达到了光管的1 0 倍左??结论 烧结铜粉粒径越小,烧结管的热通量越大,其传热性能越好。 |
英文摘要: |
Objective To study the manufacturing process of porous surface coating of sintered porous tube, and the heat transfer properties of copper sintered porous layer surface were measured. Methods Copper powder was sintered on the outside layer of brass using sintering mold, and the heat flux and enhanced heat transfer coefficient of the porous sintered tube were calculated through experiments. Results The obtained results showed that the enhanced heat transfer effect of the brass after sintering copper reached about 10 times as high as that of the light pipe in alcohol. Conclusion The smaller the particle size of sintered copper powder, the greater the heat flux of sintered tube and the better the heat transfer performance. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|