杨华,张少宏,封雷.型号研制中实验室环境试验条件剪裁方法浅析[J].装备环境工程,2015,12(2):35-38. YANG Hua,ZHANG Shao-hong,FENG Lei.Analysis on a Method to Set Laboratory Environment Test Conditions for Prototype Development[J].Equipment Environmental Engineering,2015,12(2):35-38. |
型号研制中实验室环境试验条件剪裁方法浅析 |
Analysis on a Method to Set Laboratory Environment Test Conditions for Prototype Development |
投稿时间:2014-12-26 修订日期:2015-04-15 |
DOI:10.7643/issn.1672-9242.2015.02.008 |
中文关键词: 导弹 环境条件 环境试验 |
英文关键词:missile environment condition environment test |
基金项目: |
|
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目的 分析某导弹环境条件的制定和试验流程, 总结在型号中如何制定环境试验条件和方法。方法 从环境工程的角度出发, 对产品的特性及服役环境进行分析。结果 根据项目自身的特点和需要制定相应的环境试验要求。结论 将环境条件和试验方法在某型武器装备产品中得到了成功应用。 |
英文摘要: |
Objective To analyze the development and test process of environmental conditions for a missile, and sum up the setting of environment test conditions and methods for prototype development. Methods From the perspective of environmental engineering, analyzes the characteristics of product and the service environment. Results The corresponding environment test requirements were established according to the characteristics and needs of the project. Conclusion The associated environment conditions and test method were successfully applied in a type of weaponry product. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |