| 严侠,李晓琳,胡勇.运用正弦扫频实现电动振动台模型的频域辨识[J].装备环境工程,2015,12(2):44-48. YAN Xia,LI Xiao-lin,HU Yong.Application of the Sine-sweep Test in Model Frequency Identification for a Electrodynamic Shaker[J].Equipment Environmental Engineering,2015,12(2):44-48. |
| 运用正弦扫频实现电动振动台模型的频域辨识 |
| Application of the Sine-sweep Test in Model Frequency Identification for a Electrodynamic Shaker |
| 投稿时间：2014-12-21 修订日期：2015-04-15 |
| DOI：10.7643/issn.1672-9242.2015.02.010 |
| 中文关键词: 电动振动台 正弦扫频 传递函数 最小二乘 频域辨识 |
| 英文关键词:electrodynamic shaker sine-sweep transfer function least squares frequency identification |
| 基金项目: |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 研究以电动振动台为典型设备的相关振动试验装置的频域辨识技术。方法 通过分析电动振动台数学模型， 采用正弦扫频试验方法， 进行全频带振动台空台面正弦扫频， 并对所获得的时域正弦扫频数据进行频谱分析， 进而获得系统的频率数据， 再运用复数域上的最小二乘拟合算法， 完成振动台模型传递函数的辨识。结果 通过某型电动台空台面试验， 对一组实测数据进行辨识， 辨识出的电动振动台模拟与真实模拟一致。结论 通过该方法并合理选取模型结构， 能够很好地辨识出振动试验装置的模型。 |
| 英文摘要: |
| Objective To study the frequency domain identification technology for vibration test equipment, using the electric dynamic shaker as a typical device. Methods Firstly, the mathematics model of the electrodynamic shaker was analyzed, secondly, the sine-sweep test was used for whole-frequency sine sweep of the empty vibration table, and the sine-sweep signal data acquired was subjected to frequency spectrum analysis. So the frequency data of the electrodynamic shaker system was acquired. Finally, the least squares complex-curve fitting algorithm was used to accomplish the identification of the transfer function for the vibration table model. Results Through test with an empty electrodynamic shaker, a group of measured data was identified, and the electrodynamic shaker simulation mode identified was consistent with the real simulation. Conclusion Using this method, in combination with matching the structure of the shaker model, the model of the vibration test equipment could be well identified. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
