侯健,张彭辉,程文华,赵广宇,郭为民.热带海域不同海区环境因素差异及腐蚀性对比研究[J].装备环境工程,2015,12(4):44-48,65. HOU Jian,ZHANG Peng-hui,CHENG Wen-hua,ZHAO Guang-yu,GUO Wei-min.Comparison of Environment Factors and Corrosivity in Different Tropical Sea Areas[J].Equipment Environmental Engineering,2015,12(4):44-48,65.
热带海域不同海区环境因素差异及腐蚀性对比研究
Comparison of Environment Factors and Corrosivity in Different Tropical Sea Areas
投稿时间:2015-06-08  修订日期:2015-08-15
DOI:10.7643/issn.1672-9242.2015.04.009
中文关键词:  环境因素  腐蚀性  相关性
英文关键词:environment factors  corrosivity  relativity
基金项目:
作者单位
侯健 海洋腐蚀与防护重点实验室 中国船舶重工集团公司第七二五研究所,山东 青岛 266101 
张彭辉 海洋腐蚀与防护重点实验室 中国船舶重工集团公司第七二五研究所,山东 青岛 266101 
程文华 海洋腐蚀与防护重点实验室 中国船舶重工集团公司第七二五研究所,山东 青岛 266101 
赵广宇 青岛双瑞海洋环境工程股份有限公司,山东 青岛 266101 
郭为民 海洋腐蚀与防护重点实验室 中国船舶重工集团公司第七二五研究所,山东 青岛 266101 
AuthorInstitution
HOU Jian State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute, Qingdao 266101, China 
ZHANG Peng-hui State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute, Qingdao 266101, China 
CHENG Wen-hua State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute, Qingdao 266101, China 
ZHAO Guang-yu Sunrui Marine Environment Engineering Co., Ltd, Qingdao 266101, China 
GUO Wei-min State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute, Qingdao 266101, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究三亚海域不同海区环境因素和腐蚀性差异。方法 对三亚海域亚龙湾和红塘湾两海区的自然环境因素数据和海生物种类及生长速度进行比较分析, 并对钢、 不锈钢、 铝合金和铜合金等4种典型金属材料在两海区的腐蚀性能进行对比研究。结果 两海区的海水环境因素除盐度外差别不大, 随月份的变化规律一致。由于钛合金在海水中具有良好的耐蚀性, 因此选用PVC和钛合金分别代表非金属材料和金属材料研究两海区海生物附着规律, 结果发现两海区附着海生物的数量和种类差别较大, 钛合金板的海生物附着量明显多于PVC板。四种典型金属材料在红塘湾和亚龙湾相同区带条件下的腐蚀速率相差很小。结论 两海区环境因素及腐蚀性差异不大, 具有较好相关性。
英文摘要:
      Objective To study differences in environment factors and corrosivity in different Sanya sea areas. Methods The natural environment factors in Hongtang Bay were compared with those in Yalong Bay. Furthermore, the species and the growth speed of marine organisms were also compared. Four kinds of typical metals and alloys, namely, steel, stainless steel, aluminum alloy and copper were compared for corrosivity in the two sea areas. Results It showed that sea water environment factors except salinity in the two sea areas were in good coincidence as well as their variations within months. Ti and PVC were chosen as the representatives of metal and nonmetal materials respectively to study the laws of biofouling, considering the excellent corrosion resistance of Ti in seawater. It showed that the species and amount of marine organisms adhered were quite different in the two sea areas, and the adhesion amount of marine organisms on the Ti plate was larger than that on the PVC plate. Corrosion rates of the four kinds of typical metals and alloys differed very little in the same zone conditions in the two areas. Conclusion Environment factors and corrosivity in the two sea areas have little differences and there is good relativity between environment factors and corrosivity.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12768819位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号