张思才,张方晓.基于非概率可靠性的离散变量结构优化设计[J].装备环境工程,2017,14(7):61-64. ZHANG Si-cai,ZHANG Fang-xiao.Optimization Design of Structures with Discrete Variables Based on Non-probabilistic Reliability[J].Equipment Environmental Engineering,2017,14(7):61-64.
基于非概率可靠性的离散变量结构优化设计
Optimization Design of Structures with Discrete Variables Based on Non-probabilistic Reliability
投稿时间:2017-03-15  修订日期:2017-07-15
DOI:10.7643/ issn.1672-9242.2017.07.012
中文关键词:  非概率  离散变量  结构优化  可靠性
英文关键词:non-probability  discrete variables  structural optimization  reliability
基金项目:
作者单位
张思才 中国工程物理研究院 总体工程研究所,四川 绵阳 621999 
张方晓 中国工程物理研究院 总体工程研究所,四川 绵阳 621999 
AuthorInstitution
ZHANG Si-cai Institute of Systems Engineering, CAEP, Mianyang 621999, China 
ZHANG Fang-xiao Institute of Systems Engineering, CAEP, Mianyang 621999, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 针对工程结构设计中因材料供应规范限制使得设计变量不能连续取值以及材料性能波动、外界载荷偏差等不确定性问题,探索研究非概率可靠性在离散变量结构优化设计中的应用。方法 以桁架结构杆件截面直径为设计变量、结构质量极小化为目标,考虑材料强度极限与外部载荷的不确定性,建立具有非概率可靠性指标约束的离散变量结构可靠性优化模型,并采用遗传算法求解离散变量结构优化设计问题。结果 求解获得了三杆、十杆超静定桁架杆件截面直径最优组合,得到的优化结果相较确定性优化结果更具鲁棒性。结论 非概率可靠性模型对于解决工程中设计变量具有离散性和不确定性的优化设计问题具有可行性。
英文摘要:
      Objective To explore application of non-probability reliability in optimization design of structure with the discrete variables to solve issues such as failure of continues valuing in design variables due to limit of material supply specification, fluctuation of material performance, deviation of external load, etc. Methods The nondeterminacy of material’s ultimate strength and external load was considered with cross-sectional diameter of trusswork rod pieces as design variable, with minimizing structural weight as target to establish a reliable optimization model for discrete variable structure of non-probability reliability index constrain. The genetic algorithm was used to solve the problems of truss optimization design with the discrete variables. Results Optimal combination of cross-sectional diameters of three-rod and ten-rod indeterminate truss rod pieces was obtained. The optimization result obtained was more robust than that of the deterministic optimization. Conclusion Non probabilistic reliability model is feasible for solving discreteness and non-probability in optimization design of structures with discrete variables and the uncertainty.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12770099位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号