肖勇,吴帅,王宝瑞,罗来正,王晓辉,吴洋.一种高寒气候环境疲劳试验设备的研制[J].装备环境工程,2017,14(8):11-14. XIAO Yong,WU Shuai,WANG Bao-rui,LUO Lai-zheng,WANG Xiao-hui,WU Yang.Development of a Kind of Fatigue Test Equipment for Cold Climate Environment[J].Equipment Environmental Engineering,2017,14(8):11-14. |
一种高寒气候环境疲劳试验设备的研制 |
Development of a Kind of Fatigue Test Equipment for Cold Climate Environment |
投稿时间:2017-04-23 修订日期:2017-08-15 |
DOI:10.7643/issn.1672-9242.2017.08.002 |
中文关键词: 高寒气候环境 疲劳 耦合作用 试验设备 |
英文关键词:cold climate fatigue coupling effect test equipment |
基金项目: |
|
Author | Institution |
XIAO Yong | Southwest Technology and Engineering Research Institute, Chongqing 400039, China |
WU Shuai | Southwest Technology and Engineering Research Institute, Chongqing 400039, China |
WANG Bao-rui | China South Industries Group Corporation, Beijing 100089, China |
LUO Lai-zheng | Southwest Technology and Engineering Research Institute, Chongqing 400039, China |
WANG Xiao-hui | Southwest Technology and Engineering Research Institute, Chongqing 400039, China |
WU Yang | Southwest Technology and Engineering Research Institute, Chongqing 400039, China |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目的 研制一台高寒气候环境疲劳试验设备。方法 针对装备材料在服役过程中承受高寒气候环境-拉、压、弯载荷耦合作用的工况,分析高寒环境与力学因素对材料的交互影响,确定设备的工作原理和功能特点。通过分析设备本身的工作环境及特点,对设备的结构及可靠性进行合理设计,研制一台高寒气候环境疲劳试验设备。结果 该设备可实现载荷和频率等试验参数的精确控制,能通过更换试验夹具分别开展高寒气候环境中的拉伸、压缩和弯曲疲劳试验。结论 新研制的设备适用于评价材料在高寒气候环境中的疲劳性能。 |
英文摘要: |
Objective To develop a kind of fatigue test equipment for cold climate environment. Methods Based on the service process of equipment materials under the coupling conditions of cold climate-tension, compression and bending load, interaction effects of environmental and mechanical factors were analyzed to determine working principles and function characteristics of the new equipment. Structure and reliability of the equipment were designed reasonably through analysis on working environment and characteristics of the equipment itself to design and develop a kind of fatigue test equipment for cold climate environment. Results The test equipment could accomplish precise control of test parameters such as load and frequency, and carry out the tensile, compression and bending test in the cold climate environment by changing the test fixture. Conclusion The newly developed equipment is suitable for investigating tensile, compressive and flexural properties of materials in cold climate. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|