李贺,党俊杰,高齐乐,李文默.核电站电缆桥架力学计算及工程应用[J].装备环境工程,2019,16(2):27-31. LI He,DANG Jun-jie,GAO Qi-le,LI Wen-mo.Mechanical Calculation and Engineering Application of Cable Tray in Nuclear Power Plant[J].Equipment Environmental Engineering,2019,16(2):27-31.
核电站电缆桥架力学计算及工程应用
Mechanical Calculation and Engineering Application of Cable Tray in Nuclear Power Plant
投稿时间:2018-11-23  修订日期:2019-02-25
DOI:10.7643/ issn.1672-9242.2019.02.006
中文关键词:  电缆桥架  有限元  抗震分析
英文关键词:cable tray  finite element  seismic analysis
基金项目:
作者单位
李贺 1.中国核电工程有限公司,北京 100840 
党俊杰 1.中国核电工程有限公司,北京 100840 
高齐乐 1.中国核电工程有限公司,北京 100840 
李文默 2.中国电能成套设备有限公司,北京 100080 
AuthorInstitution
LI He 1. China Nuclear Power Engineering Co, Ltd, Beijing 100840, China 
DANG Jun-jie 1. China Nuclear Power Engineering Co, Ltd, Beijing 100840, China 
GAO Qi-le 1. China Nuclear Power Engineering Co, Ltd, Beijing 100840, China 
LI Wen-mo 2. SPIC China Power Complete Equipment Co, Ltd, Beijing 100080, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究电缆桥架的受力规律。方法 采用通用有限元程序ANSYS对电缆桥架进行整体建模与力学分析,探讨S2型支架、S4型支架以及梯形支架的抗震能力,研究不同方钢长度和不同托臂层数对支架抗震能力的影响,并探讨三种截面形式的托臂承载能力。结果 梯形支架比其他两种支架抗震能力强。增加方钢长度和托臂层数会提高支架的受力,降低其抗震能力。双层异形钢截面的托臂更能有效地提高其承载能力。结论 为以后核电站电缆桥架的自主设计和改进打下了基础。
英文摘要:
      Objective To research on the stress rules of the cable tray. Methods Overall modeling and mechanical analysis of cable tray were carried out with the ANSYS finite element method. The seismic capacity of the cable tray for S2, S4 and trapezoid was discussed. Influences of different length of square steel and different number of bracket arm on the seismic capacity were discussed. Furthermore, the carrying capacity for bracket arm of three different cross-sections were discussed. Results The seismic capacity of the trapezoid cable tray was stronger than other two kinds of trays. If the length of square steel and number of bracket arm were increased, the force of the cable tray would be raised and it’s seismic capacity would be reduced. Compared with the other two forms of the bracket arms the bracket arm of the profiled steel cross-section had more effect on the carrying capacity of the try. Conclusion It lays a foundation for the self-design and improvement of cable tray in nuclear power plant.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12772533位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号