慕琴琴,徐健,燕群,黄文超.旋转叶片-机匣碰摩分析方法与试验技术研究[J].装备环境工程,2020,17(9):54-60. MU Qin-qin,XU Jian,YAN Qun,HUANG Wen-chao.Analysis Method and Test Technique of Rotor-blade-casing Rub-impact[J].Equipment Environmental Engineering,2020,17(9):54-60. |
旋转叶片-机匣碰摩分析方法与试验技术研究 |
Analysis Method and Test Technique of Rotor-blade-casing Rub-impact |
投稿时间:2020-07-05 修订日期:2020-08-08 |
DOI:10.7643/issn.1672-9242.2020.09.010 |
中文关键词: 叶片-机匣碰摩试验 冲击动力学分析方法 振动响应特征 碰摩参数 碰摩故障诊断 |
英文关键词:blade-casing rub-impact test impact dynamic analysis method vibration response characteristics rub-impact characteristics rub-impact trouble diagnosis. |
基金项目:国防项目基金项目资助(160541410024) |
|
Author | Institution |
MU Qin-qin | Laboratory of Aeroacoustics and Vibration Aviation Technology, Aircraft Strength Research Institute of China, Xi’an 710065, China |
XU Jian | Laboratory of Aeroacoustics and Vibration Aviation Technology, Aircraft Strength Research Institute of China, Xi’an 710065, China |
YAN Qun | Laboratory of Aeroacoustics and Vibration Aviation Technology, Aircraft Strength Research Institute of China, Xi’an 710065, China |
HUANG Wen-chao | Laboratory of Aeroacoustics and Vibration Aviation Technology, Aircraft Strength Research Institute of China, Xi’an 710065, China |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目的 较为深入地认识高速旋转转静子之间碰摩故障及碰摩机理。方法 采用冲击动力学分析方法,建立考虑机匣柔性的转子-盘片-机匣碰摩有限元模型,对旋转叶片-机匣碰摩的动力学行为、局部细节特征以及转静子的振动响应进行研究,并将仿真分析结果与碰摩物理试验结果进行对比分析。结果 发现其吻合性较好,证明了该仿真分析模型和仿真分析方法能够很好地描述旋转叶片-机匣之间碰摩动力学行为,以及该物理试验的有效性。在此基础上,对影响碰摩响应的不同参数进行深入研究,发现转静子之间间隙、相对运动速度和刚度比对于碰摩响应均有较大影响,得出了一些有效解释和预测碰摩故障现象的原理和规律。结论 其研究方法和研究成果可以为旋转机械碰摩故障的诊断和预测提供一定的参考。 |
英文摘要: |
To better understand the mechanism of rub-impact failure and rub-impact between high-speed rotary transitions, the complete rotor-disc-casing rub-impact finite element model considering the flexible characteristic of the casing was established through the impact dynamic analysis method. And the transient process, local detail characteristics and vibration response of blade-casing rub-impact were studied. The simulation analysis results were compared with those of the physics test. It was found that the matching degree was good. And it proved that the simulation analysis model and simulation analysis method could describe the dynamic behavior of the rub-impact between the rotating blade and casing. And the effectiveness of the physics test was also proved. On this basis, different parameters influencing the rub-impact response were further analyzed. It was found that the gap between rotor and stator, relative velocity and stiffness ratio had great influence on rub-impact response. Some principles and laws explaining and predicting the phenomenon of rub-impact trouble were obtained. The research method and research results have some reference value for the diagnosis and prediction of the mechanical rub-impact trouble. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |