冯森森,张尚文,文晓龙,王海鹏,张兵.船舶烟气海水脱硫吸收塔工艺研究与设计[J].装备环境工程,2021,18(10):85-91. FENG Sen-sen,ZHANG Shang-wen,WEN Xiao-long,WANG Hai-peng,ZHANG Bing.Technical Study and Design of Absorption Tower for Ship Flue Gas Desulphurization[J].Equipment Environmental Engineering,2021,18(10):85-91. |
船舶烟气海水脱硫吸收塔工艺研究与设计 |
Technical Study and Design of Absorption Tower for Ship Flue Gas Desulphurization |
投稿时间:2021-04-17 修订日期:2021-06-10 |
DOI:10.7643/issn.1672-9242.2021.10.014 |
中文关键词: 吸收塔 海水脱硫 船舶 工艺研究 |
英文关键词:absorption tower seawater desulfurization ship technical study |
基金项目:甘肃蓝科石化高新装备股份有限公司科学技术发展基金项目(18LKJ016) |
|
Author | Institution |
FENG Sen-sen | Shanghai Lanbin Petrochemical Equipment Co., Ltd., Shanghai 201518, China |
ZHANG Shang-wen | Shanghai Lanbin Petrochemical Equipment Co., Ltd., Shanghai 201518, China |
WEN Xiao-long | Shanghai Lanbin Petrochemical Equipment Co., Ltd., Shanghai 201518, China |
WANG Hai-peng | Shanghai Lanbin Petrochemical Equipment Co., Ltd., Shanghai 201518, China |
ZHANG Bing | Shanghai Lanbin Petrochemical Equipment Co., Ltd., Shanghai 201518, China |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
针对船舶烟气中SO2的处理工艺,根据烟气流量、烟气中SO2含量,从塔径、填料层类型和高度、液体喷嘴数量、除雾装置4个方面进行了相关参数设计和计算,最终给出了在现有烟气流量和含硫量条件下的船舶用海水脱硫吸收塔的具体参数。同时考虑烟气中含硫量的变化,并保证能够完全脱除烟气中的SO2,设置四排液体喷嘴,通过有限元分析软件FLUENT,根据出口处含硫量、塔内压力分布和流速分布优化了不同含硫量条件下喷嘴的启停方式。 |
英文摘要: |
Based on the treatment technology of SO2 in ship flue gas, according to the flue gas flow rate and the concentration of SO2, this paper designed and calculated relevant parameters from four aspects, including the tower diameter, type and height of packing layer, number of liquid nozzles, and demister. Then this paper proposed specific parameters of seawater desulfurization absorption tower for ships under the condition of existing flue gas flow rate and sulfur content. At the same time, considering the variation of sulfur content in the flue gas, and ensuring that SO2 in the flue gas can be completely removed, the author set four rows of liquid nozzles. Through the finite element analysis software FLUENT, the start and stop modes of the nozzles under different sulfur content conditions were optimized according to the sulfur content at the outlet, pressure distribution and flow velocity distribution in the tower. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|