李波,张宏翔,李世中,张亚.极端温度条件典型引信电参数变化规律和失效机理[J].装备环境工程,2022,19(11):34-40. LI Bo,ZHANG Hong-xiang,LI Shi-zhong,ZHANG Ya.Electrical Parameters Change Law and Failure Mechanism of Typical Fuze under Extreme Temperature Conditions[J].Equipment Environmental Engineering,2022,19(11):34-40. |
极端温度条件典型引信电参数变化规律和失效机理 |
Electrical Parameters Change Law and Failure Mechanism of Typical Fuze under Extreme Temperature Conditions |
|
DOI:10.7643/issn.1672-9242.2022.11.005 |
中文关键词: 极端温度条件 典型引信 电参数 失效机理 低温掉电 高温短路 导线破损中图分类号:TJ430 文献标识码:A 文章编号:1672-9242(2022)11-0034-07 |
英文关键词:extreme temperature conditions typical fuze electrical parameters failure mechanism low temperature sudden voltage drop high temperature short circuit wire damage |
基金项目:武器装备预先研究项目(90903010102) |
|
Author | Institution |
LI Bo | College of Mechatronics Engineering, North University of China, Taiyuan 030051, China |
ZHANG Hong-xiang | Defense Equipment Research Institute, Jinxi Industrial Group Co., Ltd., Taiyuan 030027, China |
LI Shi-zhong | College of Mechatronics Engineering, North University of China, Taiyuan 030051, China |
ZHANG Ya | College of Mechatronics Engineering, North University of China, Taiyuan 030051, China |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目的 研究某电子时间引信在‒60~140 ℃下电参数的变化规律和失效机理。方法 利用高低温试验机开展步进应力强化试验,增加和细化引信检测参数,在被试引信工作状态下全程记录电参数的变化,开展失效机理分析。结果 得到了引信基准频率、电能损耗率等电参数的温度特性规律和参数变化范围,发现了‒60 ℃低温掉电、130 ℃高温短路等故障模式和机理,并提出改进建议。结论 验证了极端温度应力叠加电应力的强化试验方法,获得了引信电性能参数变化规律,发现了极端温度条件下新的失效模式和失效机理。 |
英文摘要: |
The paper intends to study the change rule of electrical parameters and the failure mechanism of an electronic time fuze at ‒60~140 ℃. Through the high and low-temperature testing machine, to carry out the step stress reliability enhancement test, add and refine tested parameters, record the changes of electrical parameters in the whole process under the working condition of the tested fuze, and carry out the failure mechanism analysis. The test concluded the temperature characteristic law and parameter variation range of electrical parameters such as fuze reference frequency and power loss rate, found the fault mode and mechanism of sudden voltage drop at ‒60 ℃ and short circuit at 130 ℃, and put forward the improvement suggestions. The test verifies the intensified test method of extreme temperature stress and electric stress, obtains the change rule of fuze electrical performance parameters, and finds the new failure mode and failure mechanism under extreme temperature conditions. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|