| 张一晗,岳晓晴,李祯,马力,张海兵,邢少华.活化元素对锌合金牺牲阳极电化学性能的影响[J].装备环境工程,2024,21(6):85-95. ZHANG Yihan,YUE Xiaoqing,LI Zhen,MA Li,ZHANG Haibing,XING Shaohua.Effect of Active Elements on Electrochemical Performance of Zinc Alloy Sacrificial Anodes[J].Equipment Environmental Engineering,2024,21(6):85-95. |
| 活化元素对锌合金牺牲阳极电化学性能的影响 |
| Effect of Active Elements on Electrochemical Performance of Zinc Alloy Sacrificial Anodes |
| 投稿时间：2024-02-20 修订日期：2024-03-15 |
| DOI：10.7643/issn.1672-9242.2024.06.012 |
| 中文关键词: 活化元素 深潜装备 牺牲阳极 阴极保护 低驱动电位 电化学中图分类号:TG174.4 文献标志码:A 文章编号:1672-9242(2024)06-0085-11 |
| 英文关键词:active elements deep diving equipment sacrificial anode cathodic protection low driving voltage electrochemistry |
| 基金项目:国家重点研发计划(2022YFB3808800) |
|
|
| Author | Institution |
| ZHANG Yihan | National Key Laboratory of Marine Corrosion and Protection, Luoyang Ship Material Research Institute, Shandong Qingdao 266237, China |
| YUE Xiaoqing | National Key Laboratory of Marine Corrosion and Protection, Luoyang Ship Material Research Institute, Shandong Qingdao 266237, China |
| LI Zhen | National Key Laboratory of Marine Corrosion and Protection, Luoyang Ship Material Research Institute, Shandong Qingdao 266237, China |
| MA Li | National Key Laboratory of Marine Corrosion and Protection, Luoyang Ship Material Research Institute, Shandong Qingdao 266237, China |
| ZHANG Haibing | National Key Laboratory of Marine Corrosion and Protection, Luoyang Ship Material Research Institute, Shandong Qingdao 266237, China |
| XING Shaohua | National Key Laboratory of Marine Corrosion and Protection, Luoyang Ship Material Research Institute, Shandong Qingdao 266237, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 满足深潜装备用高强钢材料阴极保护需求，探明活化元素对锌合金牺牲阳极电化学性能的影响规律。方法 采用合金化设计方法，控制活化元素，制备新型锌合金牺牲阳极。通过常规电化学性能试验、电化学测试、扫描开尔文探针测试数据及微观形貌表征结果，综合分析活化元素对锌合金牺牲阳极组织和综合性能的影响，探明低驱动电位锌合金牺牲阳极性能的变化规律。结果 添加Ga、Mn、Sn和Cd活化元素的牺牲阳极，表面溶解形貌相对均匀，阳极电位发生不同程度的正移，用于阴极保护时，驱动电位得到降低，其工作电位基本处于–1.02~–0.8 V(vs. Ag/AgCl)，牺牲试样呈现表面溶解活性降低、溶解速率变慢的趋势。结论 通过添加各类活化元素，均使锌合金牺牲阳极性能得到不同程度的优化改善。Cd元素可增大阳极试样表面的杂乱度，随Sn、Mn含量的增加，牺牲阳极试样的晶粒尺寸得到一定细化。其中，Zn-0.5Mn系列牺牲阳极较满足高强钢阴极保护的需求，工作电位为–0.95~–0.84 V(vs. Ag/AgCl)，表面活性位点分布均匀，可进一步开发适用于高强钢结构材料阴极保护的新型牺牲阳极。 |
| 英文摘要: |
| The work aims to explore the influence of activating elements on the electrochemical performance of zinc alloy sacrificial anodes to meet the cathodic protection requirements of high-strength steel materials for deep diving equipment. A new type of zinc alloy sacrificial anode was prepared according to the alloying design method to control the activation elements. Through conventional electrochemical performance tests, electrochemical tests, scanning Kelvin probe test data, and microstructure characterization results, the influence of activation elements on the microstructure and comprehensive properties of zinc alloy sacrificial anodes was comprehensively analyzed, and the changes in the performance of low driving potential zinc alloy sacrificial anodes were explored. The surface dissolution morphology of the sacrificial anode added with Ga, Mn, Sn, and Cd activation elements was relatively uniform, and the anode potential underwent different degrees of positive shift. When used for cathodic protection, the driving potential was reduced, and its working potential was basically within the range of -1.02~-0.8 V (vs. Ag/AgCl). The sacrificial sample showed a trend of decreased surface dissolution activity and slower dissolution rate. By adding various activating elements, the sacrificial anode performance of zinc alloy is optimized and improved to varying degrees. Cd element can increase the surface disorder of the anode sample, and the grain size of the sacrificial anode sample is refined to a certain extent with the increase of Sn and Mn content. Among them, the Zn-0.5Mn series sacrificial anode better meets the cathodic protection requirements of high-strength steel, with a working potential of -0.95~-0.84 V (vs. Ag/AgCl) and a uniform distribution of surface active sites. Further development of new sacrificial anodes suitable for cathodic protection of high-strength steel structural materials is possible. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
