Corrosion Resistance of Stainless Steel in Desalinated Seawater
Received:November 12, 2016  Revised:February 15, 2017
View Full Text  View/Add Comment  Download reader
DOI:10.7643/ issn.1672-9242.2017.02.013
KeyWord:desalinated seawater  stainless steel  pitting  crevice corrosion  stress corrosion
           
AuthorInstitution
LI Chao 1.Qingdao NCS Testing & Corrosion Protection Technology Co., Ltd., Qingdao , China;2.Qingdao Research Institute four Marine Corrosion, Central Institute for Iron and Steel, Qingdao , China
WU Heng 1.Qingdao NCS Testing & Corrosion Protection Technology Co., Ltd., Qingdao , China;2.Qingdao Research Institute four Marine Corrosion, Central Institute for Iron and Steel, Qingdao , China
ZHANG Bo 1.Qingdao NCS Testing & Corrosion Protection Technology Co., Ltd., Qingdao , China;2.Qingdao Research Institute four Marine Corrosion, Central Institute for Iron and Steel, Qingdao , China
GAI De-sheng 1.Qingdao NCS Testing & Corrosion Protection Technology Co., Ltd., Qingdao , China;2.Qingdao Research Institute four Marine Corrosion, Central Institute for Iron and Steel, Qingdao , China
Hits:
Download times:
Abstract:
      Objective To study the corrosion resistance of 316L and 2205 stainless steel in desalinated seawater and explore influences of water treatment agentia on corrosion resistance of stainless steel. Methods Electrochemical test, slow strain rate tensile test, SEM, etc. were adopted. Results The critical pitting temperature of 316L in desalinated seawater was 42.7 ℃. It was 70.2 ℃ after agentia was added; the critical pitting temperature of 2205 was higher than 85 ℃. The crevice corrosion resistance property of 2205 was better than 316L. The agentia also had corrosion inhibition effect on 2205. Both 316L and 2205 had high stress corrosion resistance in desalinated seawater at 50℃. Conclusion 316L is not suitable to be used in desalinated seawater directly, but is suitable to be used in desalinated seawater with agentia; 2205 is suitable to be used in desalinated seawater.
Close