|
| Application of Reliability Simulation Test in Airborne Electronic Products |
| Received:April 19, 2021 Revised:June 15, 2021 |
| View Full Text View/Add Comment Download reader |
| DOI：10.7643/issn.1672-9242.2021.12.006 |
| KeyWord:reliability simulation test reliability evaluation airborne electronic products |
| Author | Institution |
| HU Bo |
The 29th Research Institute of CETC, Chengdu , China |
| CHEN Ping-ping |
The 29th Research Institute of CETC, Chengdu , China |
| DENG Ming |
The 29th Research Institute of CETC, Chengdu , China |
|
| Hits: |
| Download times: |
| Abstract: |
| As one of the important work of reliability design, reliability simulation test technology is widely used in product research and development because of its short cycle, low cost and obvious effects. This paper mainly studies the reliability simulation test technology in the application of airborne electronic products, through the brief introduction of the principle of reliability simulation test, the basic flow, test method, and test object selection principle, connecting with the actual engineering application, shows that the technology for airborne electronic products in the early development process design quality improvement has a positive role in promoting. Compared to the traditional physical in the back-end exposure of reliability test is mainly to solve the problem, the technology faces the front-end design, through the reliability simulation test technology of airborne electronic products reliability evaluation results, can release the weak links and potential failures of below airborne electronic products in the solution phase or before manufacturing, optimize design synchronously, and improve product reliability. As the same time, the technology can also meet the development requirements of the current stage of the development of airborne electronic products in a tight schedule and limited resources. |
| Close |
|
|
|